QDY foundry crane utilized for medium to heavy fabrication. These overhead cranes are
ideally suited to casting factory.
The Foundry crane is the main equipment for steel smelting production.
ladle cranes are used to move steel or iron ladles in steel smelting workshop with high
temperature and a lot of dust.Corrventional scheme:using the closed cab.
Each organ is H class.And the isulating YZR type motor.working in the highest ambient
temperature is 60°C,collocate with the advanced electricthe winch is made with the welding's
steel board ,the gear box with the detent and the ratchet wheel.
Power: AC 3Ph 380V 50Hz or according to client's requirement.
Control mode: Cabin control/remote control/control panel with pendant line

Product picture

design within24 hours,2 yearswarranty for crane parts-HYCRANE

Related product

design within24 hours,2 yearswarranty for crane parts-HYCRANE

Technique parameter:

Span	S(m)	10.5	13.5	16.5	19.5	22.5	25.5	28.5	31.5

Lifting height	m	20	20	20	20	20	20	20	20
Lifting speed	m/min	13	13	13	13	13	13	13	13
Trolley speed	m/min	44.9	44.9	44.9	44.9	44.9	44.9	44.9	44.9
Crane speed	m/min	118.6	118.6	118.6	119.3	119.3	114.9	114.9	114.9
Lifting motor	kw	26	26	26	26	26	26	26	26
Trolley motor	kw	2.2	2.2	2.2	2.2	2.2	2.2	2.2	2.2

Total weight	kg	17480	19680	22200	25800	28570	33750	37910	41780
Max Wheel Load	KN	112	120	130	138	145	160	171	180
Track		P43	P43	P43	P43	P43	P43	P43	P43

Main dimension	mm	10.5	13.5	16.5	19.5	22.5	25.5	28.5	31.5
Rail top to main top	H1	1876	1876	1876	1876	1876	1926	1926	1926
Rail top to hook centre	H2	602	602	602	602	602	552	552	552
Wheel base	W	4050	4050	4050	4050	4050	5000	5000	5000
Crane width	B	5800	5800	5800	5940	5940	6380	6380	6380
Hook left limitation	S1	1600	1600	1600	1600	1600	1600	1600	1600
Hook right limitation	S2	1300	1300	1300	1300	1300	1300	1300	1300
Trolley gauge	K	2000	2000	2000	2000	2000	2000	2000	2000
Note: Control mode for cab operation

China Brand QDY Factory 50ton Metallurgy casting and foundry Overhead Crane

Double girder Overhead Crane